Sand Springs, OK
New Roof Cost in Sand Springs, OK
A useful roofing budget starts with roof size and material. The quote then accounts for the work your particular roof needs.
Start a replacement budget
Enter measured roof surface if you have it. Otherwise use the footprint beneath the roof and a rough pitch, including attached roofed areas but counting each footprint only once.
The fixed material example below uses 2,000 square feet of sloped roof surface. The calculator starts with a different assumption: a 2,000-square-foot footprint at 6:12 pitch, which is about 2,236 square feet of roof. Select actual roof surface if that is the measurement you have.
Example: 2,000 square feet of measured roof surface
2,000 sq. ft. of measured roof surface. Oklahoma contractor-published installed planning ranges, including ordinary tear-off.
- Architectural asphalt shingles
- $8,500 to $11,500
- Class 4 impact-resistant shingles
- $10,500 to $14,000
- Standing seam metal
- $16,000 to $20,000
Same roof area, different materials. Use the calculator below for your measurements. Roof condition and project details can move the final price outside these ranges.
Use the footprint covered by the roof, including a garage or covered porch. A two-story home's living area is not its roof footprint.
Rise in inches for each 12 inches across. The default is 6:12. If you do not know, leave it as a rough assumption. Do not climb up to measure.
Your planning range
About 2,236 sq. ft. of roof surface
Oklahoma contractor-published installed replacement planning ranges, including ordinary tear-off. Roof complexity, access and damaged decking can change the final quote.
Discuss your roof projectRegional planning ranges for a straightforward replacement with one existing layer, ordinary access and sound decking. Your roof and quote may differ. Updated 2026-09-07.
Read the source and assumptions
The asphalt ranges come from Firehouse Roofing’s May 2026 Oklahoma pricing guide: $425–$575 per roofing square for standard architectural shingles and $525–$700 for Class 4 shingles. A square is 100 square feet. Standing seam uses Tier-One Roofing’s May 5, 2026 Tulsa guide at $8–$10 per square foot; its examples explicitly include Sand Springs. These are other contractors’ published ranges, not a Sand Springs Roofing Co price list.
The calculator multiplies measured roof surface by those rates. Footprint mode uses the pitch you enter to estimate sloped surface. It does not count a second floor twice or add an arbitrary waste percentage.
The source ranges describe ordinary tear-off and replacement. Steep or complicated roofs, extra layers, deteriorated decking, structural work and difficult access can add cost. A measured proposal establishes the actual materials and work.
Compare the work behind the totals
If two bids differ, start with their scope. One may include new flashing or a decking allowance while the other leaves those costs open. A lower total is easier to assess when you can see what it buys.
What the bid has to name
Measured surface and access
Roof size, pitch, height and access affect the material and labor required.
Removal and disposal
Name the layers coming off and where removal and cleanup are included.
Decking changes
State the unit price or other agreed method for damaged decking discovered during removal.
Flashing and underlayment
Identify what will be replaced, what may be reused and which products the scope includes.
Ventilation and roof details
Account for the intended attic assembly, pipe boots, walls, chimneys and other connections.
Warranty terms
Separate the installer’s workmanship coverage from the manufacturer’s product coverage.
Decking can be partly concealed until tear-off. The proposal can still state how extra replacement will be identified, priced and approved.
A small repair needs its own price
The calculator prices replacement over a roof surface. A localized repair can involve a small area but still require leak tracing, careful removal, flashing and access. Multiplying a patch by a replacement rate misses that work.
When the surrounding covering is sound, the repair can preserve it. Widespread wear or a material too brittle to work with may make replacement the better scope. An inspection answers that condition question before the budget decides the job.
Questions behind a roof replacement budget
What would 1,200 square feet of architectural shingles cost?
For 1,200 square feet of measured roof surface, this model gives $5,100–$6,900 using the published asphalt range. A 1,200-square-foot house can have a larger roof because of slope, overhangs and attached roofed spaces. Check which measurement a proposal uses.
Is there a cheapest season for roofing?
Schedule and pricing vary by contractor and workload. You can compare available dates for planned work, but an active leak needs attention now. A quiet calendar does not establish a discount, and a storm does not establish the price of your roof.
Does insurance pay the replacement total?
Coverage depends on the cause of loss and your policy. Deductibles, depreciation, limits and exclusions can leave costs with you. The insurance claims guide explains the separate roles of the roofer and insurer; a calculator cannot decide a claim.
Can I compare asphalt and metal using this tool?
Yes, as an opening budget for the same measured area. The metal option is standing seam, not exposed-fastener panels. Profiles, attachment, flashing and product choices affect the final price. The materials guide explains the differences to consider with the quote.
Sand Springs Roofing Co
Get a price for the roof you have
Tell us whether you are planning replacement, comparing proposals or trying to solve a leak. Our roofers can inspect the roof, explain suitable work and prepare a price for that scope.
(918) 215-8903